পণ্যের বিবরণ:
প্রদান:
|
| Welding Time: | 1-99.9S | Welding Pressure Error: | ±1N |
|---|---|---|---|
| Welding Head Size（M metal): | Max 50*3mm | Welding Head Size（T metal): | Max 100*3mm |
| Welding Head Flatness: | ±0.02mm | Way of Discharge: | Artificial pick and place |
| Working Size: | Max150x150mm | Power Supply: | AC220V±10％50HZ.2000W |
| Heating Rate: | 250℃/s | Pin Distance Range: | ＞0.2mm |
| লক্ষণীয় করা: | pcb welding machine,bonding machine |
||
CW-2A2P,Sample for China Hot Bar Pulse Heat Soldering Machine for FFC FPC PCB
Hot Bar Soldering Method for Soldering Two Circuit Boards Together Introduction:
This device is designed for double - deck working mode of double welding head. The equipment adopts high density metal material, so the lifting temperature is fast and the service life is special. The equipment operation is easy to understand. It is special in welding connector and wire with single side and double sides.
Professional Hot Bar Bonding Machine Soldering FFC HSC-Flexible Circuit Board Soldering Manufactory Specification:
|
1. Customized based on the connector 2. Double jig welding 3. Double- desk working mode 4. Can achieve ultra-fine pitch welding 5.Applicable to welding the cable and connection of communicating machine |
NO. | Subject | Parameters |
| 1 | Machine Size | L850×W650×H1320mm | |
| 2 | Working Size | Max150x150mm | |
| 3 | Weight | Approx 98KG | |
| 4 | Working Air Pressure | 0.5~0.80 Mpa | |
| 5 | Power Supply | AC220V±10％50HZ.2000W | |
| 6 | Lifting Temperature Setting | Five Section | |
| 7 | Work Environment | 10~60℃,40％~95％ | |
|
8 | Welding Pressure | 4~50N |
| 9 | Welding Pressure Error | ±1N | |
| 10 | Temperature Setting | RT∽500℃,±2℃ | |
| 11 | Heating Rate | 250℃/s | |
| 12 | Welding Time | 1-99.9S | |
| 13 | Welding Precision | Pitch 0.2mm | |
| 14 | Welding Head Size(M metal) | Max 50*3mm | |
| 15 | Welding Head Size(T metal) | Max 100*3mm | |
| 16 | Welding Head Flatness | ±0.02mm | |
| 17 | Pin Distance Range | ＞0.2mm | |
| 18 | Alignment Mode | Artificial alignment | |
| 19 | Positioning Fixture | 2 | |
| 20 | Way of Discharge | Artificial pick and place | |
| 21 | Start mode | Pressed by hands | |
| 22 | Heating Method | Pulse heating, the rise time is 1 ~ 2S | |
| 23 | Work Stage | Left and right automatic push and pull | |
| 24 | Platform Control | Precision motor control, error <0.02mm |
Heat Bonding for FPC Soldering System,FFC Heat Welding with Fpc Solder Function Module:
|
【Double welding head design】 Applicable to double-sided welding products
【Left and right platform design】 In the production, It weld with left and right cycle , saving time and improving efficiency
【The upper and lower welding heads are driven by the motor】 Up and down position is precise, the same accuracy when it repeats
【The left and right platform is driven by motor】 Left and right position is precise, the same accuracy when it repeats
【Touch screen programming】 Easy to understand and program, we can enter data location directly
|
|
|
|
|
|
|
|
|
|
China Hot Bar Pulse Heat Soldering Machine for FFC FPC PCB with CE
ব্যক্তি যোগাযোগ: Mr. Alan
টেল: 86-13922521978
ফ্যাক্স: 86-769-82784046
